Pooldex

Hot tub test strips and test kits

To read hot tub test strips, dip one strip, hold it level, and match each pad to the color chart on the bottle in the order and at the time its label gives. A hot tub needs at least 3 ppm free chlorine or 4–8 ppm bromine, with pH 7.0–7.8 (CDC). Strips are fine for daily checks, and a drop test kit is better when the number decides a dose.

By Aliaksandr Rusinski · Published October 30, 2026 · Formulas: methodology (last changed October 7, 2026) · Share

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Pooldex, free for iPhone: save your tub, get a reminder when to retest, and keep a log of every test and dose. No ads, no account. Download on the App Store

On this page (8 sections)

This page covers spa strips and spa test kits: how to read them, what each pad means in a hot tub, when to trust a strip, and how to store the bottle so the strips stay accurate. For pool strips and their charts, see how to read pool test strips.

How to read hot tub test strips

Timing and technique differ by brand, so the bottle's directions come first. The steps below combine the directions of two common strip makers (AquaChek and LaMotte):

  1. Turn the jets off so the water is calm. Take one strip out with dry fingers and close the cap right away.
  2. Dip the strip about 6 inches under the surface for the time the label gives (from a quick dip to about 2 seconds), then take it out.
  3. Hold the strip level, pads up, and don't shake off the water unless the label says to. One maker says to shake once; another says not to shake at all.
  4. Wait the time on the label, then compare each pad to the chart in the order printed on the bottle. Some strips are read after 15 seconds; others must be read within 30 seconds.
  5. Read in daylight or bright white light, not in the shade or under yellow porch lights. If a pad falls between two colors, write down both numbers.
  6. Enter the numbers in a calculator or log, and retest after any dose.

Type your readings into the hot tub calculator below. It checks every target and lists what to add, in order, in teaspoons and grams.

Hot tub chemical calculator

Inputs
Don't know it? Use the volume calculator.
ppm
ppm
ppm
More options (total chlorine, temperature, and soak limit)
ppmOptional. Needed to see combined chlorine (CC = TC − FC).
°FOptional. Used for water balance (LSI).
ppmThe highest chlorine level your label allows for soaking. Blank: 4 ppm, a common label limit. The label wins over any calculator.

Result for example values. Enter your own numbers.

Don't soak yet

Chlorine is low. After the acid step (step 2 below), wait 30 minutes with the jets running before anyone gets in.

Your targets: FC 3–4 ppm (minimum 3; 4 ppm is a common label limit), pH 7.4–7.6, TA 80–120. If your product's label lists different levels, the label wins.

1

Add chlorine

0.3 oz (about 1½ tsp)8.1 g

Dichlor granules 56%

FC 1 → 4 ppm

Chlorine is below the hot tub minimum (3 ppm).

Also adds about 2.7 ppm stabilizer (CYA).

Wait 30 min with the jets running.

2

Lower pH: add acid

0.3 oz9.2 g

Dry acid 93.2%

pH 7.8 → 7.5

pH is above 7.6.

Retest FC and pH in 30 minutes.

Save to my hot tub in the app

Estimates, not guarantees. Always follow the product label. How we calculate

What each pad means in a hot tub

A multi-pad spa strip usually has 4–6 pads. Here is what each one measures and what to aim for. If your sanitizer label lists different levels, the label wins.

Hot tub test strip pads and target ranges
PadWhat it measuresHot tub targetIf it is off
Free chlorine (FC)Chlorine that is still working3–4 ppm, or up to your label's soak limit (CDC minimum 3 ppm)Chlorine by tub size; too high: lower it
Total bromineBromine, read directly on a bromine pad4–6 ppm (CDC accepts up to 8 ppm)Bromine levels and dosing
pHHow acidic or basic the water is7.4–7.6 (CDC range 7.0–7.8)pH too high or too low
Total alkalinity (TA)The water's buffer that holds pH steady80–120 ppmFix hot tub alkalinity
Total hardnessCalcium plus magnesium (drop kits usually read calcium only)Per your tub's manual, often 150–250 ppmHot tub calcium hardness
Stabilizer (CYA)Cyanuric acid, which slows chlorine down0 ppm: the CDC advises no CYA in hot tubsHot tub cyanuric acid

Ranges: CDC for chlorine, bromine, and pH; alkalinity and hardness are common spa targets. All targets together: the hot tub chemical chart.

Strips read in steps. A pad that looks like "between 3 and 5" means the true number is somewhere in that span, not exactly 4. Test-kit maker Taylor says color-match tests are accurate to about half the gap between two color blocks.

Chlorine strips vs bromine strips

Buy strips that match your sanitizer. Spa strips for bromine tubs have a bromine pad that reads bromine directly, on a 0–20 ppm scale on one common brand. Some spa strips carry both a free chlorine pad and a total bromine pad, so one bottle covers either type of tub.

  • Don't multiply a bromine pad's reading. It already shows bromine.
  • Drop kits are different. Many DPD drop kits print only a chlorine scale. To read bromine, you multiply the chlorine number by 2.25 (Taylor). The bromine page has the conversion table.
  • Pool strips in a hot tub often lack a bromine pad and use pool ranges. Whether they work for you is covered in using pool products in a hot tub.

Hot tub test kit vs strips: when you need drops

The CDC says strips are less accurate than a DPD drop test kit. For a 400-gallon tub, small reading errors still matter, because the doses are small. A practical split:

When strips are enough and when to use a drop test kit
SituationStripsDrop test kit
Quick check before a soakYesNot needed
Fresh fill: setting alkalinity, calcium, and pHRough guide onlyYes: these set the tub up for weeks
Chlorine reads zero right after a doseCan misleadYes: above 10 ppm, sanitizer can bleach DPD and read falsely low (Taylor)
You use non-chlorine shock (MPS)Read before adding MPSMPS gives false combined chlorine on DPD reagent #3 unless the kit has a neutralizer (Taylor)
Problem that keeps coming backNoYes, and track results over time

A FAS-DPD kit (a drop-count chlorine test) gives free and combined chlorine in small steps and is the usual upgrade from strips. Kit types for pools and spas are compared in choosing a water test kit.

Storage and expiration: keep strips accurate

Strips go bad from moisture, heat, and age. A strip that has soaked up humidity can read wrong without looking different.

  • Keep the cap tight and close it right after you take a strip out (AquaChek, Taylor).
  • Use dry fingers. Never reach into the bottle with wet hands (AquaChek, LaMotte).
  • Store them cool and dry: Taylor says 36–85 °F, out of direct sun and away from pool and spa chemicals. A shelf next to the tub's chemical bucket is the wrong place.
  • Check the date. The expiration or best-by date is printed on the bottle. LaMotte says most of its strips have a 30-month shelf life. We could not find a maker's figure for how long strips last after opening, so watch the date and replace a bottle that has been left open or wet.

How often to test a hot tub

A hot tub holds a small amount of hot, heavily used water, so its readings change fast. The CDC's home pool and hot tub guidance says to test chlorine and pH at least twice a day when the tub is in use. Many owners test before each soak and after it. The full routine is in the hot tub maintenance schedule.

A log shows how your readings change over time. In the Pooldex app, you tap the value that matches each pad on the strip, and the app shows a range rather than a false exact number. It then lists the doses in order and reminds you when to retest.

Safety. Keep test strips and reagents away from children. Some drop-kit reagents are corrosive; read the kit's label. Add spa chemicals one at a time with the jets running, and never mix them. Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling.

FAQ

How do you read hot tub test strips?

Dip one strip with the jets off, hold it level, and wait the time on the bottle. Then compare each pad to the color chart in the order printed on the label. Read in daylight, and if a pad falls between two colors, treat it as a range.

Do hot tub test strips expire?

Yes. The date is printed on the bottle, and moisture or heat can ruin strips before that date. Keep the cap tight, use dry fingers, and store the bottle cool and dry, away from spa chemicals.

Can you use chlorine test strips in a bromine hot tub?

Use strips with a bromine pad, which reads bromine directly. A chlorine-only pad doesn't show the bromine number you need, and the 2.25 conversion applies to drop kits, not to a strip's bromine pad.

Do hot tub test strips measure calcium?

Most read total hardness, which is calcium plus magnesium. Drop kits usually measure calcium hardness only, so the two numbers can differ. Use the range in your tub's manual for whichever test you have.

Sources

  • CDC, What you can do to stay healthy in hot tubs (chlorine, bromine, pH levels): cdc.gov
  • CDC, Home pool and hot tub water treatment and testing (strips vs DPD kits, no CYA in hot tubs): cdc.gov
  • AquaChek, Water testing 101 (storage, dry fingers, expired strips): aquachek.com
  • AquaChek, Spa strips (free chlorine and total bromine pads): aquachek.com
  • LaMotte, Insta-TEST test strip tips (dip time, reading time, light): lamotte.com
  • LaMotte, Insta-TEST strips (shelf life): lamotte.com
  • Taylor Technologies, Technical FAQs (accuracy, bromine factor, high sanitizer, MPS interference, storage): taylortechnologies.com