Pooldex

Hot tub cyanuric acid (CYA)

Hot tub cyanuric acid (CYA, also called stabilizer) should be zero: the CDC recommends not using cyanuric acid, or chlorine products that contain it, in hot tubs. If you use dichlor granules, every 1 ppm of chlorine adds about 0.9 ppm of CYA (PHTA), and it keeps building until you change the water.

By Aliaksandr Rusinski · Published October 22, 2026 · Formulas: methodology (last changed October 7, 2026) · Share

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Pooldex, free for iPhone: save your tub, get a reminder when to retest, and keep a log of every test and dose. No ads, no account. Download on the App Store

On this page (7 sections)

That doesn't mean dichlor is wrong for a hot tub. It means you need a plan for the CYA it leaves behind: test for it, change the water on time, or switch to a sanitizer without CYA.

Do hot tubs have chlorine?

Most hot tubs are sanitized with either chlorine or bromine. The CDC's ranges for home hot tubs:

Hot tub sanitizer and CYA: what the CDC recommends
ReadingCDC recommendation
Free chlorine (chlorine tubs)At least 3 ppm
Bromine (bromine tubs)4–8 ppm
pH7.0–7.8
Cyanuric acid (CYA)Don't use it, or chlorine products that contain it
Water temperatureNo higher than 104 °F (40 °C)

Chlorine tubs often use dichlor granules (sodium dichloroisocyanurate), which are labeled for spas, dissolve fast, and add CYA. Other chlorine options, such as liquid chlorine or bleach labeled for spa use, add no CYA. Bromine tubs use bromine tablets in a floater or feeder, which contain no CYA. Ozone and UV units can help (see hot tub ozonator), but you still keep chlorine or bromine in the CDC range. To choose one, see hot tub sanitizers compared.

How dichlor builds up CYA

Dichlor is chlorine bonded to cyanuric acid. When the chlorine is used up, the CYA stays in the water. PHTA puts it at 0.9 ppm of CYA for every 1 ppm of chlorine added. In a hot tub, which needs at least 3 ppm and uses chlorine fast in hot water, that adds up quickly.

CYA added by dichlor (0.9 ppm CYA per 1 ppm chlorine)
Chlorine added from dichlor, in totalCYA added
3 ppm (one dose from 1 to 4 ppm)about 2.7 ppm
10 ppmabout 9 ppm
21 ppm (3 ppm a day for a week)about 19 ppm
50 ppmabout 45 ppm
100 ppmabout 90 ppm

CYA leaves only with the water you drain or splash out. Evaporation doesn't remove it, so topping up doesn't lower it.

Bars showing how dichlor adds stabilizer to a hot tub: about 2.7 ppm CYA per dose, 19 ppm after a week at 3 ppm a day, and 90 ppm after 100 ppm of chlorine.
A week of dichlor at 3 ppm a day already adds about 19 ppm of CYA, and only fresh water removes it.

The calculator below doses dichlor for your tub and shows the CYA each dose adds. Example: in a 400-gallon tub, raising free chlorine from 1 to 4 ppm takes 0.3 oz (about 1½ tsp, 8.1 g) of 56% dichlor and adds about 2.7 ppm of CYA. Always follow the product label.

Hot tub chlorine calculator

Inputs
Don't know it? Use the volume calculator.
ppm
ppm
More options (label strength)
%Leave blank to use the product default.

Result for example values. Enter your own numbers.

Add chlorine

0.3 oz (about 1½ tsp)8.1 g

Dichlor granules 56%

FC 1 → 4 ppm in 400 gal

Also adds about 2.7 ppm stabilizer (CYA).

0.1 oz (about ½ tsp) raises FC by 1 ppm for this hot tub.

Target for a hot tub: FC 3–4 ppm (4 ppm is a common label limit), minimum 3 ppm.

Save to my hot tub in the app

Estimates, not guarantees. Always follow the product label. How we calculate

Why CYA matters in hot water

In outdoor pools, CYA protects chlorine from sunlight. A covered hot tub gets little sun, so there is little to protect against. Meanwhile, CYA holds part of your chlorine in reserve, so the same free chlorine reading kills germs more slowly. The CDC's model code ties the minimum chlorine in pools to the CYA level for this reason. In a hot tub, the CDC's answer is simpler: no CYA at all.

That is also why a tub can test "fine" on chlorine and still have problems. If your tub has a history of dichlor, a CYA test tells you how much of that reading is actually working. The hot tub rash page explains why low or slow chlorine matters for skin.

How to lower CYA in a hot tub: change the water

Only replacing water lowers CYA. Chemicals sold to "reduce stabilizer" are aimed at pools, and we found no independent test of them in hot tubs. For a hot tub, a drain and refill is quick and resets everything else too.

  • Full drain: CYA goes to the level of your fill water, usually 0. Flush the lines first if the tub has been used a lot (how to flush hot tub lines).
  • Partial drain: replacing half the water halves the CYA. The share to replace is (CYA now − target) ÷ (CYA now − fill water CYA).
  • Upper limit: PHTA recommends a partial drain if CYA goes above 100 ppm, the APSP maximum for pools and spas. That is a ceiling, not a target. The CDC still recommends none in hot tubs.

How often to change the water depends on your tub size and how much it's used; the hot tub water change calculator estimates it. If you use dichlor, plan water changes before CYA climbs, and test CYA each time you'd normally check alkalinity. How to read a CYA test is on how to test cyanuric acid.

Switching to a sanitizer without CYA

After a fresh fill, you can keep CYA at zero by changing what you add:

  • Liquid chlorine or bleach labeled for spa use. No CYA. It is strongly alkaline (pH about 13, PHTA), so check pH after dosing. Doses for your tub are on hot tub chlorine.
  • Bromine. Bromine tablets contain no CYA, and the CDC range is 4–8 ppm. Setup and doses are on hot tub bromine.
  • Dichlor for a short time. Some owners start a fresh fill with dichlor and switch once a little CYA has built up. If you do, track how much dichlor goes in and change the water sooner.

Never use trichlor tablets or stabilized pool shock in a hot tub; they add even more CYA. See can you use pool chemicals in a hot tub.

Safety. Use only products labeled for spa or hot tub use, at the label dose. Never mix chlorine with acid, or two types of chlorine, and add chemicals to water, never water to chemicals. Keep the water at 104 °F or lower (CDC). Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling. Poison Control: 1-800-222-1222.

FAQ

Do hot tubs need cyanuric acid?

No. The CDC recommends not using cyanuric acid, or chlorine products with cyanuric acid, in hot tubs. Covered hot tubs get little sun, and CYA slows down chlorine.

Do hot tubs have chlorine?

Many do. Chlorine tubs should have at least 3 ppm of free chlorine, and bromine tubs 4–8 ppm of bromine (CDC). The chlorine usually comes from dichlor granules or from liquid chlorine labeled for spa use.

Does dichlor raise CYA in a hot tub?

Yes. Every 1 ppm of chlorine from dichlor adds about 0.9 ppm of CYA (PHTA). A week at 3 ppm of chlorine a day adds about 19 ppm. It stays until you drain.

How do you lower CYA in a hot tub?

Drain and refill. A full drain brings CYA down to your fill water's level, usually 0; replacing half the water halves it. No chemical reliably removes CYA.

What chlorine has no CYA for a hot tub?

Liquid chlorine or bleach labeled for spa use has no CYA. Bromine tablets have none either. Dichlor and trichlor both contain CYA, and trichlor tablets are not for hot tubs.

Sources

  • CDC, Home pool and hot tub water treatment and testing (no CYA in hot tubs; chlorine at least 3 ppm): cdc.gov
  • CDC, What you can do to stay healthy in hot tubs (chlorine, bromine 4–8 ppm, pH, 104 °F): cdc.gov
  • PHTA fact sheet, Dichlor (0.9 ppm CYA per ppm chlorine; partial drain above 100 ppm): phta.org
  • PHTA fact sheet, Sodium hypochlorite (pH about 13): phta.org
  • CDC, Model Aquatic Health Code 2024, Annex (chlorine and CYA): cdc.gov (PDF)
  • Dose and CYA math: our methodology page