Pooldex

Best pool shock: choose by type

The best pool shock is the type that fits your water, not a brand. Liquid chlorine leaves only a little salt, cal-hypo adds calcium, dichlor adds stabilizer (cyanuric acid, CYA), and non-chlorine shock (MPS) breaks down waste but doesn't sanitize or kill algae. Pick a type that won't push any level out of range, and add the shock amount on that product's label.

By Aliaksandr Rusinski · Published October 30, 2026 · Formulas: methodology (last changed October 7, 2026) · Share

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Pooldex, free for iPhone: save your pool and products, get wait timers and a retest reminder, and keep a log of every test. No ads, no account. Download on the App Store

On this page (9 sections)

The EPA treats the word "shock" on a pool product as a pesticide claim, so products sold as shock must be registered, and the label is the law. So the dose always comes from the label. What you choose is the type. This page compares the types; how shock differs from everyday chlorine is on pool shock vs chlorine.

Pool shock types compared

Common types of pool shock and what each leaves in the water
TypeActive ingredient (check the label)FormAlso addsWatch out for
Liquid shockSodium hypochlorite, usually 10–12.5%Liquid in jugsA little saltLoses strength in storage, faster when hot; raises pH slightly
Cal-hypo shockCalcium hypochlorite; labels range from under 50% to about 70% available chlorineGranulesCalciumSome labels say to pre-dissolve or brush so granules don't rest on vinyl or colored surfaces; never mix with other chlorine types
Dichlor shockSodium dichloroisocyanurate, 56–62% available chlorineGranulesStabilizer (CYA), about 0.9 ppm per 1 ppm chlorineRaises CYA with every dose
Non-chlorine shockPotassium monopersulfate (MPS)GranulesSulfate; lowers pH slightlyNot a sanitizer or algaecide; can read as combined chlorine on DPD tests
Lithium hypochloriteLithium hypochloriteGranulesLithiumOnce sold for vinyl pools; we could not confirm whether it is still widely available

Strengths and side effects from EPA-registered labels, PHTA fact sheets, and CDC. Strength differs between products of the same type, so the label's available chlorine percent matters more than the name on the front.

Shock also needs the same storage care as any chlorine: dry, cool, closed, and away from acid and other chlorine types. See how to store pool chemicals.

Which shock for your pool

Start with what your pool already has too much of. A shock that adds more of it causes a new problem.

Choosing a shock type by pool and water
Your poolUsually a good fitUse with care
Salt water poolThe cell's super-chlorinate or boost mode, or liquid chlorineCal-hypo, if your calcium is already high (adds calcium that can scale the cell)
Vinyl liner or above-ground poolLiquid chlorine; dichlor dissolves quicklyCal-hypo granules resting on the liner, unless pre-dissolved or brushed as the label says
Stabilizer (CYA) already highLiquid chlorine or cal-hypoDichlor
Hard water or high calciumLiquid chlorine or dichlorCal-hypo
New outdoor pool with no CYA yetDichlor adds some of the CYA you needRelying on dichlor all season
Algae or green waterA chlorine shockNon-chlorine shock (it doesn't kill algae)
Chlorine smell or sweat and oils after a party, no algaeChlorine shock, or MPS as a quick oxidizerTesting combined chlorine right after MPS

How each chlorine form behaves day to day is on types of pool chlorine. Why dichlor and tablets push CYA up over a season: trichlor vs dichlor.

Salt pool shock

A salt water pool makes chlorine in its cell, and most cells can run at full output for a day. Hayward's AquaRite has a "super chlorinate" setting that runs for 24 hours, and Pentair's IntelliChlor has a "boost" mode. Both manuals also mention adding a shock product at times, such as at first start-up or when an algae product's directions call for it. Pentair says never to add chemicals directly to the skimmer.

  • Liquid chlorine adds only salt, which a salt pool already has.
  • Dichlor works but adds CYA, so check your level first.
  • Cal-hypo adds calcium. A liquid chlorine maker warns this can lead to more scale on the salt cell. Some cal-hypo brands market their shock as salt-compatible, so if you use it, test calcium hardness more often.

Day-to-day salt pool care, including stabilizer and calcium targets, is on salt water pool care.

Liquid vs granular shock

  • Liquid shock mixes in right away and adds nothing but a little salt. It is heavy to carry, and it weakens in storage: 12.5% liquid chlorine loses half its strength in about 48 days at 95 °F (PHTA). Buy it fresh. Dose by gallons with the liquid chlorine calculator.
  • Granular shock keeps longer on the shelf and is easy to store in small amounts. Each type leaves something behind: calcium (cal-hypo) or CYA (dichlor). Doses by gallons: cal-hypo calculator and dichlor calculator.

For above-ground pools, the same rules apply. Liquid chlorine is often the simplest choice because there is nothing to dissolve and nothing to settle on the liner.

Chlorine-free pool shock (MPS): what it can and can't do

Non-chlorine shock is potassium monopersulfate. PHTA's technical notes describe it as "not a sanitizer or algaecide," so it must be used with a registered sanitizer. It oxidizes sweat, oils, and other waste; the label says when you can swim again. It does not raise free chlorine, and it doesn't clear algae.

Note: leftover MPS reacts with the DPD #3 reagent and reads as combined chlorine. Test before you add it, or use a test kit with a neutralizing reagent. Doses by label: non-chlorine shock calculator.

Reading the bag: "triple shock," "super shock," and other names

Names like "triple shock," "3-in-1," "4-in-1," and "super shock" are marketing. The active ingredient panel tells you what is in the product. For example, one "4-in-1" pool shock label on file with the EPA lists dichlor as its only active ingredient, and products sold as "super shock" under one registration are 12.5% sodium hypochlorite. Look for three things:

  • The active ingredient and its percent: it tells you the type and what it leaves behind.
  • The available chlorine percent, if listed: it tells you how strong it is.
  • The directions for shocking: the amount per 10,000 gallons (or per your volume) and the swim wait.

How much shock to add: follow the label, scaled to your pool

Shock amounts are on the label, usually per 10,000 gallons. Use the label's amount for your pool's real volume. The calculator below checks whether you need to shock at all, using combined chlorine (total chlorine minus free chlorine), and scales the label amount to your gallons. It doesn't set a shock level.

Combined chlorine calculator

Inputs
ppm
ppm
Don't know it? Use the volume calculator.

Result for example values. Enter your own numbers.

Combined chlorine (CC = TC − FC)
1 ppm High

Shock per your product's label

Follow the shock directions on your product's label for 15,000 gal. Combined chlorine is 1 ppm (0.5 or more).

Use only a product labeled for shocking pools.

Labels usually list an amount per 10,000 gallons. For 15,000 gal, use 1.5 times that amount.

No swimming until FC is back to your label's swim limit (4 ppm on many labels). Retest FC and CC tomorrow. If CC stays at 0.5 ppm or more after a few days, call a pool professional.

Save to my pool in the app

Estimates, not guarantees. Always follow the product label. How we calculate

Step-by-step directions are on how to shock a pool, and combined chlorine is explained on the combined chlorine calculator page. In the Pooldex app, shock is always a label dose: enter the amount and gallons from your bag or jug, and the app scales it to your pool and tells you when the label allows swimming again.

Safety

  • Never mix different shock or chlorine products, or chlorine with acid. Cal-hypo and trichlor can react violently; chlorine and acid release toxic gas.
  • Add shock to pool water, never water to shock. Pre-dissolve only if the label says so, in a clean bucket used for nothing else.
  • Wear gloves and eye protection. Keep shock dry, sealed, and away from children.
  • No swimming until chlorine is back at or below the swim limit on the product's label.
  • If a product is swallowed or splashed in the eyes, call Poison Control at 1-800-222-1222.
  • Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling.

FAQ

What is the best shock for a salt water pool?

Usually the cell's super-chlorinate or boost mode, or liquid chlorine, which adds only salt. Dichlor works if your CYA is low. Cal-hypo adds calcium, which can scale the cell when calcium is already high.

Is liquid shock better than granular shock?

Neither is better for every pool. Liquid shock adds only a little salt, but it weakens in storage. Granular shock keeps longer but adds calcium (cal-hypo) or stabilizer (dichlor). Choose by what your water can take.

What does chlorine-free pool shock do?

It oxidizes sweat, oils, and other waste. It doesn't sanitize, raise free chlorine, or kill algae, so it is used alongside chlorine, never instead of it.

What is triple shock for pools?

A marketing name, not a type of chemical. Read the active ingredient on the label: the multi-purpose shocks we checked were dichlor, and others may be cal-hypo. The type tells you what it adds to your water.

How much liquid shock do I add to my pool?

The amount on the jug's shock directions, scaled to your pool's gallons. Labels usually give an amount per 10,000 gallons. Check the strength on the label, because 10% and 12.5% products differ.

Sources

  • EPA, Use of the term "shock" for swimming pool, hot tub, and spa products: epa.gov
  • EPA, Introduction to pesticide labels (the label is the law): epa.gov
  • EPA-registered calcium hypochlorite label (pre-dissolve to protect vinyl and colored surfaces): epa.gov (PDF)
  • EPA-registered dichlor labels (56% and 62% available chlorine): 56% (PDF), 62% (PDF)
  • EPA-registered "4-in-1" pool shock label (dichlor active ingredient): epa.gov (PDF)
  • EPA-registered liquid shock label (12.5% sodium hypochlorite, "super shock" brand names): epa.gov (PDF)
  • PHTA / AQUA Tech Notes, Potassium monopersulfate (not a sanitizer or algaecide; DPD interference): PDF
  • PHTA fact sheet, Sodium hypochlorite (strength loss by temperature): phta.org
  • PHTA fact sheet, Dichlor (CYA per ppm chlorine): phta.org
  • Hayward, AquaRite manual (super chlorinate): hayward.com (PDF)
  • Pentair, IntelliChlor IC15 installation and user's guide (boost, start-up shock, skimmer warning): pentair.com (PDF)
  • HASA, Using liquid chlorine in a saltwater pool (cal-hypo and calcium scale): hasa.com
  • NOAA CAMEO Chemicals, Trichloroisocyanuric acid (reacts with calcium hypochlorite): noaa.gov