Pooldex

Pool shock vs chlorine

Most pool shock is chlorine: a bag of 65% cal-hypo or 56% dichlor, or a jug of 10–12.5% liquid chlorine, added in the larger amount its label gives for shocking. The difference from daily chlorine is the dose and the purpose, not the chemical; only non-chlorine shock (MPS) is a different product.

By Aliaksandr Rusinski · Updated October 22, 2026 · Formulas: methodology (last changed October 7, 2026) · Share

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Pooldex, free for iPhone: save your pool and products, get wait timers and a retest reminder, and keep a log of every test. No ads, no account. Download on the App Store

On this page (6 sections)

Daily chlorine replaces what your pool loses each day and keeps free chlorine (FC) in its target range. Shock raises FC well above that range for a short time to break down combined chlorine, clear cloudiness, or kill algae. Always follow the product label.

What's in the bag: shock products compared

The same products that chlorinate every day are sold as shock. To compare them fairly, here is what each takes to raise FC by 1 ppm in 10,000 gallons, and what it leaves behind. The shock amount itself comes from each product's label.

Comparison of pool shock products: cal-hypo, dichlor, liquid chlorine, pool-labeled bleach, and non-chlorine shock, with the amount per 1 ppm of chlorine and what each adds; shock amount from the label.
Shock is mostly the same chlorine at the label's larger dose; what differs between products is what they leave behind.
Common shock products: active ingredient, amount per 1 ppm, and side effects (10,000 gallons)
Sold asActive ingredientFor +1 ppm FCAlso adds
Cal-hypo shockCalcium hypochlorite, 65%2.1 oz (58 g)About 0.7 ppm calcium per 1 ppm FC; raises pH
Dichlor shockSodium dichloroisocyanurate, 56%2.4 oz (68 g)About 0.9 ppm stabilizer (CYA) per 1 ppm FC
Liquid chlorineSodium hypochlorite, 12.5% or 10%10 fl oz (12.5%); 13 fl oz (10%)A little salt only
Household bleach (pool-labeled)Sodium hypochlorite, 6% by weight21 fl ozA little salt only
Non-chlorine shockPotassium monopersulfate (MPS)Adds no free chlorineSulfate; lowers pH slightly

Amounts from our chlorine calculator for fresh product at label strength. Side effects: PHTA fact sheets and reaction stoichiometry (our calculation). This table compares products; it is not a shock dose. Use the amount on your label.

Because the side effects differ, the right shock depends on your water. With high stabilizer, dichlor makes it worse and cal-hypo or liquid chlorine doesn't. With high calcium or hard water, cal-hypo adds more calcium. Liquid chlorine adds neither, which is why many owners use it for both jobs. The full comparison of chlorine forms is on types of pool chlorine.

Do you need to shock? Check combined chlorine

Shock has a job: breaking down combined chlorine (chloramines), clearing cloudy water, or killing algae. Combined chlorine (CC) is total chlorine minus free chlorine. When it is 0.5 ppm or more, the calculator scales the shock amount on your product's label to your pool's gallons.

Combined chlorine calculator

Inputs
ppm
ppm
Don't know it? Use the volume calculator.

Result for example values. Enter your own numbers.

Combined chlorine (CC = TC − FC)
1 ppm High

Shock per your product's label

Follow the shock directions on your product's label for 15,000 gal. Combined chlorine is 1 ppm (0.5 or more).

Use only a product labeled for shocking pools.

Labels usually list an amount per 10,000 gallons. For 15,000 gal, use 1.5 times that amount.

No swimming until FC is back to your label's swim limit (4 ppm on many labels). Retest FC and CC tomorrow. If CC stays at 0.5 ppm or more after a few days, call a pool professional.

Save to my pool in the app

Estimates, not guarantees. Always follow the product label. How we calculate

Other reasons to shock are cloudy or green water, a strong "chlorine" smell, heavy use or a storm, and opening the pool. You don't need to shock on a calendar if FC stays in range and CC stays low. Step-by-step instructions are on how to shock a pool.

Shock vs daily chlorine: dose and timing

Daily chlorine vs shock
Daily chlorineShock
GoalKeep FC in the target range for your CYABreak down chloramines, clear haze, kill algae
How muchYour daily loss, from your own testsThe shock amount on the product label, scaled to your gallons
How oftenEvery day or two in summerOnly when needed
WhenEvening, after the sun is off the waterEvening, pump running
SwimmingWhen FC is back in rangeOnly when FC is at or below the label's swim limit (often 4 ppm)

How much to add every day depends on how fast your pool loses chlorine: see how often to add chlorine. Waiting to swim after a shock: how long after shocking you can swim.

Non-chlorine shock (MPS) is different

Potassium monopersulfate oxidizes sweat and other organics, so it can help with combined chlorine, but it adds no free chlorine and does not kill algae. It also shows up as combined chlorine on DPD tests (the most common chlorine tests), so test before adding it or the next day. It cannot replace chlorine in a pool that has none. Dose it by its label with the non-chlorine shock calculator.

Do and don't pictograms for storing pool chemicals: keep acid and chlorine apart in a locked, cool, dry place; never mix chlorine with acid or two chlorine types; plus how heat weakens liquid chlorine.
Store acid and chlorine apart in a locked, cool, dry place, and never let two products meet in a bucket, scoop, or skimmer.

Shock bags and buckets of tablets need the same care as any chlorine: dry, cool, closed, and away from acid. Where to keep each product, and how to carry it home in a car, is on how to store pool chemicals.

Safety

  • Never mix shock with other chlorine products, with acid, or with anything else. Cal-hypo mixed with trichlor or dichlor can react violently and start a fire; chlorine with acid releases toxic gas.
  • Add shock to the pool, not water to shock. Pre-dissolve granules in a bucket of pool water only if the label says so.
  • Wear gloves and eye protection. Store shock dry, sealed, and apart from other chemicals.
  • Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling.
  • If someone swallows a product or gets it in their eyes, call Poison Control at 1-800-222-1222.

FAQ

Is shock the same as chlorine?

Chlorine shock is ordinary chlorine at a higher dose. Most shock bags are cal-hypo or dichlor, and liquid chlorine with pool shock directions works the same way. The exception is non-chlorine shock (MPS), which oxidizes but does not sanitize or raise free chlorine.

Can I just use pool shock instead of chlorine?

Chlorine shock can be your daily chlorine if you add the small daily amount, not the shock amount, but each form leaves something behind: cal-hypo adds calcium and dichlor adds stabilizer. Over a season that builds up, so liquid chlorine is usually the better everyday choice. Non-chlorine shock can't replace chlorine at all.

Do you put shock and chlorine in a pool at the same time?

No. Add one product at a time with the pump running, and never mix them in a bucket or feeder. If you shock, the shock is your chlorine for that day; skip the regular dose and retest FC the next morning.

Is shock stronger than chlorine tablets?

Not per pound: trichlor tablets are about 90% available chlorine, more than cal-hypo (65–73%) or dichlor (56–62%). Shock works faster because granules and liquid dissolve right away, while tablets release chlorine slowly over days.

When should I shock instead of adding chlorine?

When combined chlorine is 0.5 ppm or more, when the water is cloudy or green, when it smells strongly of chlorine, after heavy use or a storm, and at opening. Otherwise, regular chlorine to your target range is enough.

Does non-chlorine shock replace chlorine?

No. MPS breaks down organic waste but doesn't raise free chlorine or kill algae. Keep FC in range with chlorine and use MPS only as a quick oxidizer, dosed by its label.

Sources

  • PHTA fact sheet, Dichlor (available chlorine, CYA per ppm): phta.org
  • PHTA fact sheet, Sodium hypochlorite: phta.org
  • PHTA / AQUA Tech Notes, Potassium monopersulfate: PDF
  • CDC, Home pool and hot tub water treatment and testing: cdc.gov
  • CDC MMWR, Pool chemical injuries, 2008–2017: cdc.gov
  • Doses and the label-scaling formula: our methodology page