Above-ground salt water pool: systems, salt, and care
An above-ground salt water pool works like any salt pool: a salt system plugged into the filter pump's return hose turns dissolved salt into chlorine while the pump runs. Intex's own salt table targets 3,000 ppm for its Krystal Clear saltwater systems; use the salt level in your system's manual and test free chlorine (FC) as you would in any pool.
Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.
Pooldex, free for iPhone: pick your Intex, Bestway, or Coleman model once, then see what to add after every test. No ads, no account. Download on the App Store
On this page (9 sections)
Enter your pool's gallons, your current salt reading, and the target from your system's manual. The calculator gives the pounds of pool salt and the number of bags. Gallons for common models are on Intex pool sizes.
How a salt system works on an above-ground pool
The system has two parts: a control box and a cell (electrode) that sits in the water path between the filter and the pool. As water flows past the cell, a low electric current turns some of the salt into chlorine. The salt isn't used up; it leaves only when water splashes out, drains, or is backwashed.
- It still makes chlorine. A salt pool is a chlorine pool. You still test FC and keep it in range; see salt water pool care.
- It only works while the pump runs. No flow, no chlorine. The run time you set decides how much chlorine the pool gets.
- The water is far less salty than the ocean. At 3,000 ppm, pool water has less than a tenth of the salt in seawater.
Can any above-ground pool use salt?
Most can, but check two things before you buy.
- Your pool's manual and warranty. Steel-wall pools have metal walls, top rails, and hardware that salt water can corrode faster. Warranty terms on salt differ by brand: some cover salt systems, some set conditions such as regular checks of the steel rails for rust, and some may exclude them. Read your warranty before adding salt. Resin (plastic) frames and soft-sided pools have less metal to worry about.
- Your pump's flow. A salt system needs enough water flow to work. Intex lists 300–1,000 gallons per hour (gph) of pump flow for its QS400 system, for pools up to 4,500 gallons; larger Intex systems have their own ratings. Intex says the QS400 also works with non-Intex pumps.
To size a cell for your pool's chlorine demand instead of its box rating, use the salt chlorine generator size calculator.
Intex Krystal Clear saltwater systems
Intex sells saltwater systems on their own and combined with a sand filter pump. Features on the QS400 product page include a 24-hour clock for run time, three self-cleaning cycles (6, 10, or 14 hours), a control panel with a display, and a GFCI plug. Each model lists the largest pool it is made for, so match it to your pool's gallons, not its diameter.
Intex salt systems show codes when there is a problem. On its support site, Intex explains two of them:
| Code | Meaning | What to do |
|---|---|---|
| 91 | Salt too low | Add salt evenly, let it dissolve, and check against Intex's salt table. If 91 stays after you've added the right amount, don't add more: Intex says the electrode may need replacing. |
| 92 | Salt too high | Lower salt with a partial water change, then retest. |
Other codes are in your model's manual. For any system, troubleshooting steps are on salt cell not working.
How much salt to add
- Test the salt first with salt test strips or a meter. Fresh tap water already has some salt, and a pool that ran salt last year may still hold most of it.
- Find your target in your system's manual. For Intex Krystal Clear systems, Intex's table is built around 3,000 ppm. Other brands give their own number.
- Use the calculator above for the pounds and bags. Use pure pool salt (sodium chloride) with no iodine or anti-caking additives; see can you use table salt in a pool.
- Run the pump and pour the salt around the pool's edge, not into the skimmer unless your manual allows it. Brush it so it doesn't sit in one spot on the liner. Some manuals say to switch the salt system off while the salt dissolves; follow yours.
- Circulate for about 24 hours, then retest before turning the system back on or adding more.
More on salt ranges by brand and testing is on pool salt level.
Setting the run time
A small above-ground pool reaches high chlorine quickly, so start low and adjust:
- Bring FC into your target range first, then let the salt system keep it there.
- Test FC every day for the first week, at the same time of day.
- If FC falls day to day, add an hour of run time. If it climbs, take one away.
- Expect to raise the time in hot weather and with more swimmers, and lower it in cool weather.
To check that the system is producing chlorine, Intex suggests dipping a test strip right next to the return fitting, where treated water enters the pool, and looking for small gas bubbles coming off the electrode into the return hose.
Weekly care and codes
- Test FC and pH several times a week once the run time is settled (daily in hot weather), and salt every few weeks or after heavy rain.
- Watch pH. Salt pools tend to drift up in pH; the reason and the fix are in salt water pool care.
- Stabilizer (cyanuric acid, CYA) still matters outdoors. Without it, sunlight breaks down chlorine almost as fast as the cell makes it. Your system's manual gives its CYA range.
- Clean the electrode as the manual says. Intex systems run self-cleaning cycles, but scale can still build up in hard water.
- Rinse the top rails and hardware with fresh water after days with a lot of splashing on a steel-wall pool, and dry off salt crust.
Chemicals for Intex pools in general are on Intex pool chemicals.
Winter and storage
Salt doesn't evaporate, so the salt stays in the water over winter if the pool stays up. Drain the salt system along with the pump and hoses, and store them indoors in a dry place above 32 °F (0 °C), as Intex advises for its filter pumps. If you take the pool down, the salty water goes with it: check local rules on where pool water can drain, and keep it off the lawn, since salt and chlorine can harm grass (Intex). See how to drain an above-ground pool.
Safety. Plug the salt system and pump only into a GFCI-protected outlet, and unplug both before any service. Don't run the system without water flow. If the GFCI trips again and again, stop using the equipment and call a licensed electrician. Never put other chemicals into the salt system or pump; add them to the pool water. Always follow the product label and the system's manual.
FAQ
Is a salt system worth it for an above-ground pool?
It can be if you swim often and want steady chlorine without dosing by hand. The trade-offs are the cost of the system and replacement electrodes, closer attention to pH, and more care with steel parts. You still test free chlorine. For a pool you use only a few weekends a year, measured doses of liquid chlorine are often simpler.
Will salt water damage an above-ground pool?
Salt water can speed up corrosion of steel walls, top rails, and hardware. Resin and soft-sided pools have less exposed metal. Keep salt at the level in your manual, not higher, keep pH in range, rinse metal parts, and read your warranty's terms on salt.
What do Intex saltwater codes 91 and 92 mean?
Code 91 means the salt level is too low, and 92 means it is too high. Add salt evenly for 91, or do a partial water change for 92. If 91 stays after adding the right amount, Intex says not to add more salt: the electrode may need replacing.
Do I still need to test chlorine with a salt system?
Yes. The salt system makes chlorine, but how much ends up in the water depends on run time, weather, and swimmers. Test free chlorine and pH several times a week, and daily in hot weather.
Can I use table salt in an above-ground salt pool?
Only if it's pure sodium chloride with no iodine or anti-caking agents, which most table salt has. Use pool salt labeled for salt chlorinators.
Sources
- Intex, Pools salt table for saltwater systems (3,000 ppm optimal, salt by pool size): intexcorp.com (PDF)
- Intex, QS400 Krystal Clear saltwater system (up to 4,500 gallons, 300–1,000 gph, 24-hour clock, self-clean cycles, non-Intex pumps): intexcorp.com
- Intex Support, Codes 91 and 92: intexsupport.com
- Intex Support, How can I check if the Intex saltwater system is producing chlorine: intexsupport.com
- Intex Support, Getting the pool ready for winter (store the pump above 0 °C, draining rules, lawn): intexsupport.com
- Hayward, AquaRite owner's manual 092538 Rev D (how salt chlorination works, salt is not used up): hayward.com (PDF)