How to clean a pool, step by step
Clean a pool from the top down: skim the surface, brush the walls and waterline, vacuum the floor, empty the skimmer and pump baskets, check the filter gauge, then test and balance the water. Hayward suggests skimming daily if you can, and brushing walls, ladders, and the waterline at least once a week.
On this page (8 sections)
This is the physical cleaning routine. Chemistry, the filter, and problem water each have their own guides, linked at each step. For the full weekly and monthly calendar, see the pool maintenance schedule.
The order that works
Work from the top down so the debris you loosen ends up where the next step removes it. Skimming first keeps leaves from sinking. Brushing before vacuuming puts wall dirt on the floor, where the vacuum picks it up. The filter check comes after vacuuming, because vacuuming fills the filter with dirt. Testing comes last, after everything has mixed.
Step by step
- Skim the surface. Use a leaf net on a pole to lift leaves, bugs, and floating debris before they sink. Hayward says daily is ideal but not required.
- Brush the walls, steps, ladders, and waterline. Work toward the main drain. Pay attention to the waterline, where oils and dirt collect, and to corners and steps where water moves slowly. Hayward says at least once a week. Use a nylon brush on vinyl, fiberglass, and painted surfaces; use stainless steel brushes only on plaster.
- Vacuum the floor. Fill the vacuum hose with water first so no air reaches the pump, then connect it to the skimmer or vacuum port. Move the head slowly in long, slightly overlapping strokes, as Hayward describes, so debris stays on the floor instead of clouding the water. For heavy debris, use the filter's WASTE setting if it has one, and top up the water afterward. An automatic or robotic cleaner can do this step between manual cleanings.
- Empty the skimmer and pump baskets. Turn the pump off before opening the pump basket. Hayward warns that a clogged pump basket can damage the pump.
- Check the filter pressure gauge. Vacuuming fills the filter with dirt. Hayward's vacuuming guide says that if the gauge reads about 10 psi above normal, stop, backwash, and continue. See pool filter pressure and how to clean a pool filter.
- Top up the water to the middle of the skimmer opening.
- Test and balance. Run the pump for at least 30 minutes, then test free chlorine (FC), pH, and total alkalinity. Add one product at a time.
Pool cleaning supplies
| Supply | What it's for |
|---|---|
| Telescopic pole | Holds the net, brush, and vacuum head |
| Leaf skimmer net (flat) and leaf rake (deep bag) | Floating debris; a rake for heavy leaf loads on the floor |
| Wall brush | Nylon for vinyl, fiberglass, and painted pools; stainless steel only for plaster |
| Vacuum head and hose (or an automatic cleaner) | Floor debris and settled dirt |
| Tile and waterline cleaner, soft sponge | Scum line at the surface |
| Test kit or test strips | Chlorine, pH, alkalinity after cleaning |
| Garden hose with a spray nozzle | Rinsing baskets and cartridge filters |
Small above-ground pools need the same tools in smaller sizes. A hand-held battery vacuum works well on inflatable and frame pools.
How often to clean
- Daily in season, if you can: skim, and glance at the skimmer basket.
- Weekly: brush, vacuum, empty the pump basket, check the filter gauge, and do a full water test.
- After storms, parties, or pollen days: a full clean the same day, before debris sinks and feeds algae. After a hurricane, follow storm recovery for pools first.
- When the gauge says so: clean or backwash the filter.
Trees overhead, lots of swimmers, and no cover all mean more frequent cleaning. A cover is a low-cost way to cut the work.
After cleaning: test and balance
Cleaning removes debris, but it doesn't sanitize. Chlorine does that, and it's used up faster in a pool full of leaves and dirt. After a big cleanup, test FC and pH. If FC is below the minimum for your stabilizer level, add chlorine as the label directs. The pool chemical calculator gives every dose in the right order from your test.
There's no need to shock after every cleaning. Shock when your test shows a problem: algae, cloudy water, or high combined chlorine (used-up chlorine).
When cleaning isn't enough
- Green water or slimy walls: that's algae, and brushing alone won't clear it. See how to clear a green pool.
- Cloudy water after cleaning: often a filter or chemistry problem; see cloudy pool water.
- A ring at the waterline that won't brush off: see pool scum line.
- Stains on the floor or walls: brushing doesn't remove metal or organic stains; see pool stains.
Safety. Turn the pump off before opening the pump basket or filter. Keep electrical cords for automatic cleaners and hand vacuums away from the water unless the product is designed for it, and plug pool equipment into a GFCI-protected outlet. Never mix pool chemicals, and add each one to the water separately. Always follow the product label.
FAQ
How often should you clean your pool?
Skim daily in season if you can, and brush, vacuum, and empty the baskets once a week. Clean the filter when its pressure gauge reads about 8–10 psi above its clean reading. Clean again after storms or heavy use.
What supplies do you need to clean a pool?
A telescopic pole, a skimmer net, a wall brush that suits your pool surface, a vacuum head and hose (or an automatic cleaner), and a test kit. A tile cleaner and a garden hose nozzle help with the waterline and the baskets.
Can you clean a pool naturally, without chemicals?
You can clean it without chemicals, with a net, brush, vacuum, and filter. To keep it sanitized, you still need a sanitizer such as chlorine, kept in the range on its label, because cleaning removes debris but doesn't kill germs or algae.
Should you shock a pool after cleaning it?
Not by default. Test first. Shock when the test shows low chlorine with algae, cloudy water, or high combined chlorine, and dose by the product label.
How do you clean a pool without a vacuum?
Use a leaf rake for debris on the floor, brush dirt toward the main drain so the pump pulls it to the filter, and run the pump longer. On a small above-ground pool, a hand-held battery vacuum or a garden hose siphon can lift the dirt off the floor.
Sources
- Hayward, 3 tips for maintaining a clean pool (skim daily ideally, brush weekly with the waterline, pump basket, filter, testing): hayward.com
- Hayward, How to vacuum your above-ground pool (prime the hose, slow overlapping strokes, waste setting, 10 psi above normal): hayward.com
- Intex Support, General pool water maintenance (daily filtration, cartridge rinse, weekly test strips): intexsupport.com
- CDC, Home pool and hot tub water treatment and testing: cdc.gov