Muriatic acid for pools: how much to add
Muriatic acid for pools lowers pH and alkalinity: for every 10,000 gallons, about 11 fl oz of 31.45% muriatic acid lowers pH from 7.9 to 7.5 (alkalinity 100 ppm, stabilizer 40 ppm). That is about 1.1 fl oz per 1,000 gallons, and the calculator scales it to your pool.
Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.
Pooldex, free for iPhone: save your pool and products, get wait timers and a retest reminder, and keep a log of every test. No ads, no account. Download on the App Store
On this page (9 sections)
Those two readings are total alkalinity (TA) and stabilizer (CYA). To lower total alkalinity by 10 ppm, it takes about 26 fl oz of the same acid per 10,000 gallons. Half-strength 14.5% acid needs about 2.3 times as much.
Calculator: pH now/target, TA, CYA, gallons, acid strength
Pick what you want to lower first (the healthy ranges are on pool pH levels). pH mode asks for pH now, target pH, total alkalinity, stabilizer, and borates if you use them. Alkalinity mode only needs TA now and target, because acid removes alkalinity at a fixed rate. Lowering TA a long way is a multi-day job with aeration between doses; see how to lower alkalinity. Then choose your acid: 31.45% muriatic (sold as 20° Baumé), 14.5% "safer" muriatic, or dry acid (sodium bisulfate, 93.2%).
Amounts are rounded down on purpose. It is easy to add a little more after a retest; undoing too much acid means buying soda ash and waiting another day. If you want the reasons pH keeps climbing and other ways to control it, read how to lower pH in a pool. This page is about the product itself: how much, how strong, and how to pour it.
Why rules of thumb disagree (ounces vs a quart per 0.2)
Fixed rules online disagree widely. In September 2026 we found pool pages saying one quart per 10,000 gallons lowers pH by 0.1, and one page that gives both that rule and about 8 oz for a 0.2 drop. By our model, a full quart of 31.45% acid per 10,000 gallons at TA 100 and CYA 40 takes pH from 7.8 to about 7.1, not 7.7. A 0.1 drop there needs closer to 2.6 fl oz.
No fixed rule can be right for every pool, because the acid needed for the same pH drop depends on how much buffer is in the water: carbonate alkalinity and, less obviously, stabilizer. Here is the same 0.2 drop, pH 7.8 to 7.6, per 10,000 gallons with different TA and CYA:
| Total alkalinity | CYA 0 ppm | CYA 40 ppm | CYA 80 ppm |
|---|---|---|---|
| 60 ppm | 2.7 fl oz | 3.9 fl oz | 5.2 fl oz |
| 80 ppm | 3.6 fl oz | 4.8 fl oz | 6.1 fl oz |
| 100 ppm | 4.5 fl oz | 5.8 fl oz | 7.0 fl oz |
| 120 ppm | 5.4 fl oz | 6.7 fl oz | 7.9 fl oz |
| 150 ppm | 6.8 fl oz | 8.0 fl oz | 9.3 fl oz |
Closed-system carbonate model with cyanurate buffering, rounded down. The spread from the gentlest to the most buffered water is about 3.4 times.
So a rule tuned for one pool will over- or under-dose the next one by a factor of three or more. Real pools also drift: after dosing, carbon dioxide slowly escapes and pH creeps back up, which is one reason rules of thumb are set high. Stepped doses with a retest handle that better than a big guess. The calculator uses your own TA and CYA. We cross-checked the model: for pH 7.8 → 7.5 at TA 100 and CYA 40 it gives 9.6 fl oz per 10,000 gallons, the same as the legacy TFP (Trouble Free Pool) calculator (see methodology).
Max per dose: 0.4 pH or 20 ppm TA, then retest
We split big corrections into steps. One dose lowers pH by no more than 0.4 or TA by no more than 20 ppm; then you circulate and retest before the next one. These limits are our own safety margin, not an industry standard. They help prevent the two most common mistakes: a pH crash below 7.0 and a wrong starting number (pH tests are unreliable above 10 ppm chlorine, and test kits stop reading above about 8.2).
With 31.45% acid, the 20 ppm TA limit is about 51 fl oz per dose for every 10,000 gallons. For a pH-only correction from 7.9 to 7.5 at TA 100 and CYA 40, the dose is about 11 fl oz per 10,000 gallons and removes only about 4.6 ppm of TA. If pH is above 8.2, assume it may be higher than your kit shows: dose for 8.2 → 7.8 first, then retest.
Chart: 500–40,000 gallons
Two common jobs for every pool size, with 31.45% acid. The pH column assumes TA 100 and CYA 40; if yours differ, use the calculator. Each size links to its full dose sheet.
| Pool size | Lower TA by 10 ppm | pH 7.8 → 7.5 (TA 100, CYA 40) |
|---|---|---|
| 500 gal | 1.2 fl oz | 0.4 fl oz |
| 1,000 gal | 2.5 fl oz | 0.9 fl oz |
| 2,000 gal | 5.1 fl oz | 1.9 fl oz |
| 3,000 gal | 7.6 fl oz | 2.8 fl oz |
| 4,000 gal | 10 fl oz | 3.8 fl oz |
| 5,000 gal | 12 fl oz | 4.8 fl oz |
| 6,000 gal | 15 fl oz | 5.7 fl oz |
| 7,000 gal | 17 fl oz | 6.7 fl oz |
| 8,000 gal | 20 fl oz | 7.6 fl oz |
| 10,000 gal | 25 fl oz | 9.6 fl oz |
| 12,000 gal | 30 fl oz | 11 fl oz |
| 15,000 gal | 38 fl oz | 14 fl oz |
| 20,000 gal | 51 fl oz | 19 fl oz |
| 25,000 gal | 64 fl oz | 24 fl oz |
| 30,000 gal | 76 fl oz | 28 fl oz |
| 40,000 gal | 102 fl oz | 38 fl oz |
Each size links to its full dose chart.
How to add acid safely
- Put on chemical-resistant gloves and eye protection. Work outdoors and stand upwind: muriatic acid releases irritating fumes as soon as the cap is off.
- Measure the dose into a clean plastic container used only for acid. Never use a scoop or bucket that has touched chlorine.
- With the pump running, pour slowly and low, close to the water surface, in front of a return jet in the deep end. In a vinyl-liner or above-ground pool, first add the acid to a bucket of pool water (acid into water, never water into acid) and pour that around the deep end, so a concentrated plume doesn't sink onto the liner.
- Rinse the measuring container with pool water into the pool and cap the jug.
- Keep the pump running and retest pH after about 30 minutes, or after one full circulation if your pump is small. Wait at least that long before adding any other chemical; the order to add pool chemicals explains the sequence. When swimming can resume is on how long to wait to swim after adding chemicals.
Safety
Never mix acid with chlorine. The two release chlorine gas, and the CDC counts thousands of pool-chemical injuries in U.S. emergency rooms every year. Store acid and chlorine apart, ideally in different places, not on the same shelf. Keep children and pets out of the area, and don't let anyone swim until the acid has mixed and you have retested. If acid gets on skin or in eyes, rinse with plenty of water and call Poison Control at 1-800-222-1222. Always follow the product label. More in our pool chemical safety guide.
What is muriatic acid? (hydrochloric acid, HCl)
Muriatic acid is an old trade name for hydrochloric acid (HCl) dissolved in water. It is the same acid; the name is used for technical-grade acid sold for pools and masonry, not lab-grade acid. Pool stores sell it in two strengths: 31.45% (labeled 20° Baumé) and about 14.5% ("safer" or "low-fume"). Check the strength on your label before you use the calculator, because the same dose of the weaker acid does less than half the work.
In a pool it does two jobs at once. Every dose lowers pH, and every dose also removes some total alkalinity. Which change you aim for depends on how you dose: small doses for pH, larger doses plus aeration for alkalinity (see how to lower alkalinity).
Half-strength (14.5%) acid
"Safer" or "low-fume" muriatic acid is usually about 14.5% hydrochloric acid. It fumes less and is less aggressive if spilled, but you pour more of it: 14.5% acid carries about 4.26 mol of acid per liter versus about 9.97 for 31.45%, so you need roughly 2.34 times the volume. For the lead example (pH 7.9 → 7.5, TA 100, CYA 40) that is about 27 fl oz instead of 11 fl oz per 10,000 gallons. Compare prices per unit of acid, not per jug. Some low-fume products also contain additives; if your label gives a different strength, pick the closest option in the calculator.
Dry acid (sodium bisulfate) is the other option: easier to store and measure, but it adds sulfate, which leaves the pool only when water is replaced. For the same lead example it takes about 15.7 oz (just under 1 lb) per 10,000 gallons. Where it fits better is covered in the pH guide.
FAQ
How long does it take muriatic acid to lower pool pH?
The reaction itself is immediate. What takes time is mixing: the acid has to circulate through the whole pool. With the pump running, retest after about 30 minutes, or after a full turnover for a large pool or a small pump. Over the following days pH may creep back up as carbon dioxide escapes, which is normal and not a sign the acid failed.
Can you pour muriatic acid straight in a pool?
Yes, if you pour it slowly and low in front of a return jet with the pump running, in the deep end, away from swimmers. For vinyl liners and above-ground pools, dilute it first in a bucket of pool water, always adding acid to water. Never pour it into the skimmer. There is no fixed mixing ratio for a pH or alkalinity dose. Set ratios are for cleaning jobs, such as the 4:1 mix (4 parts water, 1 part acid) on our salt cell cleaning page.
What is muriatic acid used for in a pool?
Mainly to lower pH and total alkalinity. Diluted, it also removes scale from salt cells and is used by pros to acid-wash plaster. It is not a sanitizer and does nothing to algae or germs.
How long is muriatic acid good for?
Muriatic acid doesn't break down in storage the way liquid chlorine does. It loses strength mainly as fumes escape from a loose or damaged cap. We could not confirm a published shelf life, so check the date and storage directions on your label, and keep the jug tightly closed.
How do you neutralize a muriatic acid spill?
Find the Safety Data Sheet (SDS) for your product, usually on the maker's website, and follow section 6, "Accidental Release Measures." It gives the cleanup steps for that exact product. Keep people and pets away, wear gloves and eye protection, and get fresh air. If acid gets on skin or in eyes, rinse with plenty of water and call Poison Control at 1-800-222-1222.
Does muriatic acid affect pool salt?
Only a little. Acid leaves chloride in the water, the same part that makes up salt, so years of acid doses raise the salt reading slightly. It never replaces adding salt. Salt pools often need acid more often, because the cell pushes pH up. See the pool salt calculator.
Sources
- Taylor Technologies, K-1005 treatment tables (acid for alkalinity): PDF
- Wikipedia, Hydrochloric acid (density table used for acid strength): wikipedia.org
- OSHA, Hazard Communication Standard: Safety Data Sheets (section 6, accidental release measures): PDF
- CDC, pool chemical injuries: archive.cdc.gov
- Secondary, used only to cross-check the pH model: legacy TFP pool calculator, legacy.poolcalculator.com
- Examples of fixed rules of thumb (read 2026-09-29): cristallopools.com, clearwaterpoolsystems.com, allinonecalculator.io