Pooldex

How often to add chlorine to a pool

Add chlorine every day, or every other day, in summer, in the amount your pool loses: in a 10,000-gallon pool, each 2 ppm of daily loss takes about 26 fl oz of 10% liquid chlorine. Chlorine tablets in a floater and salt cells add chlorine all the time, so with those you test daily and adjust instead of dosing.

By Aliaksandr Rusinski · Updated October 11, 2026 · Formulas: methodology (last changed October 7, 2026) · Share

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Pooldex, free for iPhone: save your pool and products, get wait timers and a retest reminder, and keep a log of every test. No ads, no account. Download on the App Store

On this page (5 sections)

There is no fixed schedule that fits every pool, because sun, heat, swimmers, and stabilizer change how fast chlorine disappears. The reliable answer comes from two tests a day apart. Always follow the product label.

How often to add chlorine, by type

Comparison of liquid chlorine, trichlor, dichlor, and cal-hypo: what each adds per 1 ppm of chlorine and how much stabilizer or calcium builds up over a season.
Trichlor and dichlor add stabilizer and cal-hypo adds calcium with every dose; liquid chlorine adds only a little salt.
How often to add chlorine, and the amount for a 2 ppm daily loss in 10,000 gallons
Chlorine you useHow oftenAmount for 2 ppm (for example, free chlorine 3 → 5)Also adds
Pool liquid chlorine 12.5%Every day or every other day20 fl ozA little salt
Pool liquid chlorine 10%Every day or every other day26 fl ozA little salt
Household bleach 6% (pool-labeled)Every day or every other day41 fl ozA little salt
Cal-hypo 65% granulesEvery day or every other day4.1 ozAbout 1.4 ppm calcium
Dichlor 56% granulesEvery day or every other day4.8 ozAbout 1.8 ppm stabilizer (CYA)
Trichlor tablets 90% (floater or feeder)Continuous; refill before the tablets are gone (chlorinator feeder settings)3.0 oz of tablet per dayAbout 1.2 ppm CYA; lowers alkalinity
Salt chlorine generatorContinuous; adjust the output settingThe cell makes it from saltNothing new

Amounts from the calculator on this page at CYA 40, for fresh product at label strength. A 2 ppm daily loss is an example: measure your own. Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling.

Why not twice a week? At a stabilizer (CYA) level of 40 ppm, the target for free chlorine (FC) is 3–5 ppm, with a minimum of 3. Our vacation calculator shows that a 15,000-gallon pool dosed to 4 ppm and losing 2 ppm a day falls below that minimum in about half a day. A bigger dose doesn't fix that, because many chlorine labels set a 4 ppm swim limit. Small, frequent doses keep FC inside the window. In spring and fall, when loss is lower, every other day is often enough.

Find your daily chlorine loss

  1. One evening, test FC and add chlorine to the top of your target range. Retest after 30 minutes with the pump running and write that number down.
  2. The next evening, test FC again before adding anything.
  3. Your daily loss is last night's number minus tonight's.
  4. Repeat for three or four days and use the typical value.
  5. Enter tonight's FC and your target in the calculator below; the result is tonight's dose.

Chlorine dose calculator

Inputs
Don't know it? Use the volume calculator.
ppm
ppm
ppmSets your minimum and target chlorine. Use 0 if you don't know.
More options (label strength)
%Leave blank to use the product default.

Result for example values. Enter your own numbers.

Add chlorine

31 fl oz908 mL

Pool liquid chlorine 12.5%

FC 1 → 4 ppm in 10,000 gal

10 fl oz raises FC by 1 ppm for this pool.

Target for CYA 40: FC 3–5 ppm, minimum 3 ppm.

Save to my pool in the app

Estimates, not guarantees. Always follow the product label. How we calculate

A big overnight drop is a warning sign. With no sun, a healthy pool loses little; a drop of more than 1 ppm from dusk to dawn (a guideline from pool-owner communities, not a standard) suggests algae or debris is using chlorine. In that case, see chlorine not holding before adding more every day.

Liquid chlorine to replace a daily loss, by pool size
Pool sizeLoss 1 ppm/day2 ppm/day3 ppm/day4 ppm/day
10,000 gal, 10%13 fl oz26 fl oz38 fl oz51 fl oz
10,000 gal, 12.5%10 fl oz20 fl oz31 fl oz41 fl oz
15,000 gal, 10%19 fl oz38 fl oz58 fl oz77 fl oz
15,000 gal, 12.5%15 fl oz31 fl oz46 fl oz61 fl oz
20,000 gal, 10%26 fl oz51 fl oz77 fl oz102 fl oz
20,000 gal, 12.5%20 fl oz41 fl oz61 fl oz82 fl oz
25,000 gal, 10%32 fl oz64 fl oz96 fl oz1.0 gal (128 fl oz)
25,000 gal, 12.5%26 fl oz51 fl oz77 fl oz102 fl oz
30,000 gal, 10%38 fl oz77 fl oz115 fl oz1.2 gal (154 fl oz)
30,000 gal, 12.5%31 fl oz61 fl oz92 fl oz123 fl oz

Computed with our engine for fresh pool liquid chlorine at label strength (trade percent). Older jugs, or jugs stored in heat, are weaker, so you may need more. Other sizes: liquid chlorine calculator.

What destroys chlorine in a pool

  • Sunlight, when stabilizer is low. With CYA near zero, sunlight can destroy most of the chlorine in one afternoon. Stabilizer at 30–50 ppm protects it: see what cyanuric acid does.
  • Swimmers. Sweat, sunscreen, and other waste use up chlorine and form combined chlorine.
  • Debris, pollen, and rain runoff. Organic dirt has a chlorine demand of its own.
  • Algae. Even before you see it, growing algae uses chlorine, which is why loss jumps without an obvious reason.
  • Heat. Warm water speeds up every reaction above, and chlorine also loses strength in a hot storage shed before it reaches the pool.

Cut the loss and you cut the dose: dose in the evening, keep CYA in range, use a cover if you have one, and keep the filter clean. For the full routine around chlorine (testing, brushing, filter checks), see the pool maintenance schedule.

Safety

  • Never mix chlorine with acid or with a different chlorine product: the mix can release toxic gas or start a fire. Add one product at a time, with the pump running.
  • Add chlorine to the pool water, never water to the product. Wear gloves and eye protection.
  • Store chlorine cool, dry, closed, apart from acid, and out of reach of children.
  • Always follow the product label. It is a violation of federal law to use a pesticide product in a manner inconsistent with its labeling.
  • If someone swallows a product or gets it in their eyes, call Poison Control at 1-800-222-1222.

FAQ

How often should I add chlorine to my pool?

Every day or every other day in summer, in the amount your pool loses. Measure FC after dosing one evening and again the next evening; the difference is your daily loss. In a 15,000-gallon pool, each 1 ppm of loss is about 19 fl oz of 10% liquid chlorine.

Should I add chlorine to my pool every day?

In hot, sunny weather, usually yes, if you use liquid chlorine, bleach, or granules. Small daily doses keep FC above the minimum for your CYA without going over the label's swim limit. With a tablet floater or a salt cell, chlorine is added continuously, and your daily job is the test.

How long does chlorine last in pool water?

It depends on sun, stabilizer, heat, and use. Without stabilizer, sunlight can remove most of it in one afternoon. With CYA at 30–50 ppm, a typical pool loses part of its chlorine each day rather than all of it. Your own two-day test tells you how long it lasts in your pool.

Can you swim immediately after adding chlorine?

Wait until the chlorine has mixed with the pump running and FC is back within your target range and at or below the swim limit on the product label (often 4 ppm). After a routine evening dose, that usually means swimming the next day. After shocking, see how long after shocking you can swim.

Can you add too much chlorine to a pool?

Yes. FC above your label's swim limit means no swimming until it drops, and the CDC model code sets 10 ppm as an upper limit for pools in use. If you overshoot, stop dosing, leave the pool uncovered in the sun, and retest; see pool chlorine too high.

Is it better to add chlorine at night or in the morning?

In the evening. Sunlight breaks chlorine down, so a dose added after the sun is off the water has the whole night to mix before it starts losing strength. Test again before anyone swims the next day.

Sources

  • CDC, Home pool and hot tub water treatment and testing: cdc.gov
  • CDC, Model Aquatic Health Code 2024, Annex (FC minimums by CYA, 10 ppm upper limit): cdc.gov (PDF)
  • PHTA fact sheet, Sodium hypochlorite (strength loss in storage): phta.org
  • PHTA fact sheet, Dichlor (CYA per ppm): phta.org
  • Doses and targets: our methodology page