Pool chemical calculator

Pool chemical calculator

Inputs
Don't know it? Use the volume calculator.
ppm
ppm
ppmSets your chlorine target. Blank means 0 ppm (no stabilizer).
ppm
More options (total chlorine, temperature, and swim limit)
ppmOptional. Needed to see combined chlorine (CC = TC − FC).
°FOptional. Used for water balance (LSI).
ppmThe "do not swim above" number on your chlorine label. Blank: 4 ppm, a common label limit. The label wins over any calculator.

Result for example values. Enter your own numbers.

Don't swim yet

Chlorine is low. After the acid step (step 3 below), wait 30 minutes with the pump running before anyone gets in.

Your targets: FC 3–4 ppm (minimum 3 for CYA 40; 4 ppm is a common label limit), pH 7.4–7.6, TA 80–120, CYA 30–50. If your product's label lists different levels, the label wins.

1

Add chlorine

58 fl oz1.70 L

Pool liquid chlorine 10%

FC 1 → 4 ppm

Chlorine is below the minimum for your CYA (3 ppm).

Wait 30 min with the pump running.

2

Raise alkalinity: add baking soda

4.2 lb1.91 kg

Baking soda

TA 70 → 90 ppm

Total alkalinity is below 80 ppm.

Wait 30 min with the pump running.

3

Lower pH: add acid

13 fl oz393 mL

Muriatic acid 31.45%

pH 7.8 → 7.5

pH is above 7.6.

Retest pH before this step; the amount may change.

Retest FC and pH in 30 minutes.

Save to my pool in the app

Estimates, not guarantees. Always follow the product label. How we calculate

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Calculator by PooldexAdd it to your site