Hot tub chemical calculator

Hot tub chemical calculator

Inputs
Don't know it? Use the volume calculator.
ppm
ppm
ppm
More options (total chlorine, temperature, and soak limit)
ppmOptional. Needed to see combined chlorine (CC = TC − FC).
°FOptional. Used for water balance (LSI).
ppmThe highest chlorine level your label allows for soaking. Blank: 4 ppm, a common label limit. The label wins over any calculator.

Result for example values. Enter your own numbers.

Don't soak yet

Chlorine is low. After the acid step (step 2 below), wait 30 minutes with the jets running before anyone gets in.

Your targets: FC 3–4 ppm (minimum 3; 4 ppm is a common label limit), pH 7.4–7.6, TA 80–120. If your product's label lists different levels, the label wins.

1

Add chlorine

0.3 oz (about 1½ tsp)8.1 g

Dichlor granules 56%

FC 1 → 4 ppm

Chlorine is below the hot tub minimum (3 ppm).

Also adds about 2.7 ppm stabilizer (CYA).

Wait 30 min with the jets running.

2

Lower pH: add acid

0.3 oz9.2 g

Dry acid 93.2%

pH 7.8 → 7.5

pH is above 7.6.

Retest FC and pH in 30 minutes.

Save to my hot tub in the app

Estimates, not guarantees. Always follow the product label. How we calculate

Always follow your product’s label directions. Pool and spa chlorine, bromine, shock, and algaecides are EPA-registered pesticides: use products labeled for pool or spa use, and don’t swim or soak until levels are within the limit on your product’s label. If this page and a label disagree, the label wins.

Calculator by PooldexAdd it to your site